Mechanical Performance of Asphalt Mixtures with Natural Aggregates and Recycled Aggregates for Surface Course

Autor: Vagner da Costa Marques, Ricardo Almeida de Melo, Diego Meira de Lacerda, Bismak Oliveira de Queiroz, Antônio Marcos de Araújo Gouveia
Rok vydání: 2014
Předmět:
Zdroj: Key Engineering Materials. 600:657-666
ISSN: 1662-9795
DOI: 10.4028/www.scientific.net/kem.600.657
Popis: The recycled aggregates of construction and demolition solid waste can be used on pavements to decrease environmental impacts in cities. Thus, this study aimed to compare the mechanical performance of asphaltic mixtures made with natural aggregates and concrete recycled aggregates for surface course of pavements. The materials were collected in an asphalt mixing plant and in a construction and demolition solid waste recycling plant located in João Pessoa/PB, Brazil. The Marshall asphalt mix design was chosen to determine optimum asphalt content and evaluate mechanical performance of asphaltic mixtures. The asphalt mixtures specimens were composed of natural aggregates, and afterwards of recycled aggregates with percent contents of 25, 50 and 100. The optimum asphalt contents were 5.7 and 7.5%, Marshall stability of 1,070 and 790 Kgf, flow of 6.2 and 5.7 mm for natural aggregate asphalt mixtures and asphalt mixtures with 25% recycled aggregates, respectively. Moreover, percent air voids and percent voids filled with asphalt met the Brazilian DNIT: ES 031/2006 specified standard. However, the asphalt mixtures with 50 and 100% recycled aggregates did not meet the specified standard. Therefore, it was concluded that the replacement of natural aggregates with 25% recycled concrete aggregates in asphalt mixtures can be technically viable to build asphalt surface course on pavements, besides lowering pavement costs and decreasing environmental impacts.
Databáze: OpenAIRE