Pull-off adhesion testing for concrete repairs

Autor:	David Cleland, Lulu Basheer
Rok vydání:	2007
Předmět:	Engineering business.industry Interface (computing) Building and Construction Structural engineering Adhesion Test method Paint adhesion testing Strength of materials Pull off test Cohesion (chemistry) General Materials Science Mortar business Civil and Structural Engineering
Zdroj:	Magazine of Concrete Research. 59:771-776
ISSN:	1751-763X 0024-9831
DOI:	10.1680/macr.2007.59.10.771
Popis:	Where one material is bonded to another, the only appropriate test method to measure bond or adhesion is often a peel or pull-off test. For cement-based materials (mortar or concrete) the pull-off test is preferred partly because it is relatively easy to carry out; however, one limitation lies in the difficulties of interpreting the results. This difficulty lies in the fact that not all failures occur at the interface and there is then a question of whether those that fail at the interface only are an accurate reflection of the interface adhesion strength. The current paper seeks to address this issue through a study of the probability of interface adhesion plotted against concrete cohesion failure. It recommends a method for estimating the error between the measured adhesion failures and the theoretical adhesion strength.
Databáze:	OpenAIRE
Externí odkaz:	https://explore.openaire.eu/search/publication?articleId=doi_________::307ceb8a687b966b43e361a8f04ce69a https://doi.org/10.1680/macr.2007.59.10.771 Zobrazit plný text záznamu