Microstructural Parameters of Cu-Al2O3 Dispersion Strengthened Materials
| Autor: | Michal Besterci, Oksana Velgosová, Andrej Leško, Ivan Kohutek |
|---|---|
| Rok vydání: | 2003 |
| Předmět: |
Materials science
Mechanical Engineering Metallurgy Extraction (chemistry) Analytical chemistry chemistry.chemical_element Condensed Matter Physics Microstructure Copper Matrix (geology) chemistry Mechanics of Materials Phase (matter) Volume fraction General Materials Science Dispersion (chemistry) Carbon |
| Zdroj: | Materials Science Forum. :35-40 |
| ISSN: | 1662-9752 |
| DOI: | 10.4028/www.scientific.net/msf.416-418.35 |
| Popis: | Microstructural parameters of Cu-Al 2 O 3 dispersion strengthened materials were evaluated in the paper. Using the extraction carbon replica for analyses of Cu-Al 2 O 3 (1-10 vol.%) system, it was shown that the majority phase of dispersoids were the A1 2 O 3 particles of 60 nm average diameter, which were distributed individually or in clusters of ∼380 nm size. The real volume fraction estimated on the metallographical cross sections of coarser Al 2 O 3 phase was slightly different than the nominal volume fraction. The overestimation resulted from the presence of inclusions, especially the FeO from the milling environment. The distribution of Al 2 O 3 particles in the matrix estimated by three methods (quadrant count method, polygonal method, and by using the interparticle distances) showed that particles distribution in A material (1 vol.%) is very close to the Poisson point process (PPP). Particles distributions in materials B and C (8 and 10 vol. %) exhibit the features of regularity what was proved mainly by the parameter of spherical contact distance σ θ . |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|