The influence of thermal history on internal stress distributions in sheets of PMMA and polycarbonate
| Autor: | Alan H. Windle, J. R. Saffell |
|---|---|
| Rok vydání: | 1980 |
| Předmět: |
chemistry.chemical_classification
Toughness Birefringence Materials science Polymers and Plastics Annealing (metallurgy) General Chemistry Polymer Residual Surfaces Coatings and Films chemistry visual_art Thermal Materials Chemistry visual_art.visual_art_medium Tempering Polycarbonate Composite material |
| Zdroj: | Journal of Applied Polymer Science. 25:1117-1129 |
| ISSN: | 1097-4628 0021-8995 |
| DOI: | 10.1002/app.1980.070250614 |
| Popis: | The through-thickness birefringent patterns (nx – nz) of PMMA and polycarbonate (PC) are measured as a function of thickness, cooling rate, and annealing time. A method is demonstrated for separating the elastic stress from the residual birefringence. The residual birefringence is explained as the residual orientation induced when cooling through the galss transition. The shape of the elastic (tempering) stress distribution is apparently independent of the cooling rate and annealing time, the choice of polymer, and the sheet thickness. The magnitude of the tempering stres is dependent on cooling rate but nearly independent of choice of polymer and sheet thickness. The decays of both the tempering stress and the residual orientation are measured as a function of annealing time at 120°C for polycarbonate. The measured birefringence decays only slightly; however, the elastic tempering stress reverts, on annealing, to permanent (anelastic) orientational strain. The tempering stress at the sheet surface is not an adequate criterion for defining toughness in polycarbonate. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|
Plný text