Cutting conditions and tool wear when machining wood-based materials
| Autor: | Miroslav Dado, Josef Chladil, Marián Kučera, Eva Šebelová Rybářová, Josef Sedlak |
|---|---|
| Rok vydání: | 2019 |
| Předmět: |
0106 biological sciences
Environmental Engineering Materials science business.product_category Depth of cut Abrasive Mechanical engineering Bioengineering 01 natural sciences Wedge (mechanical device) law.invention Machining Particle board law 010608 biotechnology Tool wear business Waste Management and Disposal |
| Zdroj: | BioResources. 14:3495-3505 |
| ISSN: | 1930-2126 |
| DOI: | 10.15376/biores.14.2.3495-3505 |
| Popis: | The article deals with data in the cutting process of wood-based materials. The cutting process influences the shape and dimensions of a cutting edge. The experiments were focused on monitoring the changes of the cutting edge in machining of particle board and the influence of cutting speed on the tool wear. Cutting tests were performed during milling at cutting rates in the range 7.95 to 17.9 m/s (477 to 1074 m/min), a depth of cut of 9.5 mm, and a tooth feed of 0.05 mm. The wear process of cutting wedge during particle board milling is characterized by a decrease in the cutting edge of insert blades. The comparative digital dial gauge was used for measurement of the cutting wedge recession. The course of the wear of wood based materials exhibited similarity in graphical representation with abrasive material cutting. The resulting dependency may be used for selection of the most suitable cutting conditions according to operator requirements. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|