Highly translucent nanostructured glass-ceramic
Autor: | Viviane Oliveira Soares, Robson Ferrari Muniz, Edgar Dutra Zanotto, Francisco C. Serbena, Gabriel dos Santos Oliveira, Crislaine da Cruz |
---|---|
Rok vydání: | 2021 |
Předmět: |
010302 applied physics
Glass-ceramic Materials science Process Chemistry and Technology Nucleation Crystal growth 02 engineering and technology Nanoindentation 021001 nanoscience & nanotechnology Microstructure 01 natural sciences Surfaces Coatings and Films Electronic Optical and Magnetic Materials law.invention Crystal Flexural strength law 0103 physical sciences Materials Chemistry Ceramics and Composites Composite material 0210 nano-technology Elastic modulus |
Zdroj: | Ceramics International. 47:4707-4714 |
ISSN: | 0272-8842 |
DOI: | 10.1016/j.ceramint.2020.10.039 |
Popis: | Transparent and translucent glass-ceramics (GCs) are found in an increasing number of domestic and high-technology applications. In this paper, we evaluated and optimized the effects of two-stage heat treatments on the resulting crystalline phases and microstructure of a glass of the SiO2–Li2O–P2O5–TiO2–CaO–ZnO–Al2O3 system. The objective was to develop a transparent nanostructured glass-ceramic (GC). After numerous heat treatment trials, we found that a long nucleation period of 72 h at 455 °C followed by a crystal growth treatment at 660 °C for 2 h resulted in a highly translucent GC having homogenously distributed nanocrystals. The relatively high amount of P2O5 (2.5 mol%) induced the formation of lithium disilicate as the main crystal phase. We thus developed a GC having crystals under 50 nm, with a high crystallized fraction (52%vol. Li2Si2O5 and 26% vol Li2SiO3), transmittance of approximately 80% in the visible spectrum for 1.2 mm thick specimens, nano hardness of 8.7 ± 0.1 GPa (load of 400 mN), a high elastic modulus of 138 ± 3 GPa as measured by nanoindentation, and good flexural strength (350 ± 40 MPa) as measured by ball-on-3 balls tests. Due to its high content of Li+, this GC has the potential to be chemically strengthened and can be further developed to be used in a number of applications, such as on displays of electronic devices. |
Databáze: | OpenAIRE |
Externí odkaz: |