A study on the exit flow characteristics determined by the orifice configuration of multi-perforated tubes

Autor: Jeekeun Lee, Sangkyoo Lee, Namsoo Moon
Rok vydání: 2012
Předmět:
Zdroj: Journal of Mechanical Science and Technology. 26:2751-2758
ISSN: 1976-3824
1738-494X
DOI: 10.1007/s12206-012-0721-z
Popis: A multi-perforated tube indicates the existence of multiple holes in various shapes on the surface of long cylinder-type or rectangular tubes, and the hole installed on the surface is called an orifice as it is relatively small in size, compared with the surface area of the tubes. In this study, flowrate distribution features and changes in discharge angle according to the blockage ratio resulting from the changes in the number of orifices and the thickness of multi-perforated tubes were investigated by means of analysis and experiment, targeting the multi-perforated tubes where rectangular orifices are installed on the both sides of square tubes. In addition, contraction coefficient and flow coefficient between orifices were analytically investigated. The more increase in blockage ratio of multi-perforated tubes, the more uniform flowrate distribution between orifices. The discharge angle becomes more and more perpendicular in the longitudinal direction of multi-perforated tubes as it gets closer to the end of orifices, exhibiting big differences at the entrance if blockage ratio is small. The more increase in the thickness of multi-perforated tubes, the more uniform flowrate distribution between orifices become as contraction coefficient increases. The flow coefficient distribution of orifices using the pressure at the entrance of the orifices of multi-perforated tubes increases in the longitudinal direction of the multi-perforated tubes, exhibiting values ranging from 0.66 to 0.68 as to BR = 0.893 ∼ 0.979.
Databáze: OpenAIRE
Externí odkaz: