| Autor: |
L. Giancarli, L. Baraer, J.F. Salavy, Y. Severi, N. Dinot, J. Quintric-Bossy, E. Proust |
| Rok vydání: |
1993 |
| Předmět: |
|
| DOI: |
10.1016/b978-0-444-89995-8.50291-5 |
| Popis: |
The development of the water-cooled lithium-lead box-shaped blanket concept for DEMO has now reached the stage of thermo-mechanical optimization. In the previous design phases the preliminary dimensioning of the cooling circuit has permitted to define the water proportions required in the breeder region and to demonstrate, after a minimization of steel proportion and thicknesses, that this concept could reach tritium breeding self-sufficiency. In the present analysis the location of the coolant pipes has been optimized for the whole equatorial plane cross-section of both inboard and outboard segments in order to maintain the maximum Pb-17Li/steel interface temperature below 480°C and to minimize the thermal gradients along the steel structures. The consequent thermo-mechanical analysis has shown that the thermal stresses always remain below the allowable limits. Segment fabricability and removal are the next design issues to be analysed. Within this strategy, a first manufactury sequence for the outboard segment is proposed. |
| Databáze: |
OpenAIRE |
| Externí odkaz: |
|
