| Autor: |
Joseph A. Felker, J. S. Kraus, Sailesh Mansinh Merchant, P. A. Orphanos, Isik C. Kizilyalli, F. Klemens, Leonidas E. Ocola, C. Biddick, Myrtle I. Blakey, Masis Mkrtchyan, Avi Kornblit, Warren K. Waskiewicz, Nace Layadi, James Alexander Liddle, Gregg M. Gallatin, Reginald C. Farrow |
| Rok vydání: |
1999 |
| Předmět: |
|
| Zdroj: |
SPIE Proceedings. |
| ISSN: |
0277-786X |
| DOI: |
10.1117/12.351093 |
| Popis: |
A manufacturable process for fabricating alignment marks that are compatible the SCALPEL lithography system is described. The marks were fabricated in a SiO 2 /WSi 2 structure using SCALPEL lithography and plasma processing. The positions of the marks were detected through e-beam resist in the SCALPEL proof of lithography (SPOL) tool by scanning the image of the corresponding mask mark over the wafer mark and detecting the backscattered electron (BSE) signal. Scans of 1 μm line-space patterns yielded mark positions that were repeatable within 20 nm 3σ with a dose of 4 μC/cm 2 and signal-to-noise of 32 dB. An analysis shows that the measured repeatability is consistent with a random noise limited response combined with SPOL machine factors. By using a digitally sequenced mark pattern, the capture range of the mark detection was increased to 13 μm while maintaining 36 nm 3σ precision. Further improvements in mark detection repeatability are expected when the SCALPEL electron optics is fully optimized. |
| Databáze: |
OpenAIRE |
| Externí odkaz: |
|
