Cyclic oxidation processes during anodizing of Al–Cu alloys
| Autor: | Peter Skeldon, M. Beneke, J. Ferguson, S.J. Garcia-Vergara, L. Iglesias-Rubianes, George Thompson |
|---|---|
| Rok vydání: | 2007 |
| Předmět: |
Materials science
Anodizing General Chemical Engineering Inorganic chemistry Alloy technology industry and agriculture chemistry.chemical_element Electrolyte engineering.material equipment and supplies Copper Metal chemistry.chemical_compound chemistry Aluminium visual_art Electrochemistry visual_art.visual_art_medium Aluminium alloy engineering Tartaric acid |
| Zdroj: | Electrochimica Acta. 52:7148-7157 |
| ISSN: | 0013-4686 |
| Popis: | The influence of copper on the morphologies of porous anodic alumina has been investigated under current and voltage control using a sputtering-deposited Al–2.7 at.% Cu alloy and a commercial AA 2024-T3 aluminium alloy anodized in either sulphuric acid electrolyte or the same electrolyte but with addition of tartaric acid. The findings indicate that film development involves repeated formation of embryo cells of anodic alumina at the metal/film interface. During the initial stages of anodizing at constant voltage, cell formation is accompanied by current peaks in the current–time response. The porosity of the resultant films has a lateral aspect due to the layering of embryo cells. The thickness of individual layers is proportional to the formation voltage, with a ratio of the order 1 nm V −1 . The cell formation is accompanied by enrichment of copper in the alloy, incorporation of copper species into the anodic film, in low amounts relative to the alloy, and evolution of oxygen. These processes disrupt the formation of the classical pore morphology, characteristic of high purity aluminium, due to continuous formation of fresh embryo cells and re-direction of pores. The main effect of the tartaric acid addition to the sulphuric acid was to reduce the rate of anodizing of the alloys at constant voltage by about 10–20%. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|
Full Text from ScienceDirect