INFLUENCE OF MACROSTRUCTURE ON THE DENSITY OF OAK WOOD

Autor: Anatoliy Tarasov, Svetlana Snegireva, Aleksandra Kiseleva, Aleksey Platonov, Tatyana Kuryanova
Rok vydání: 2021
Předmět:
Zdroj: Forestry Engineering Journal. 11:99-108
ISSN: 2222-7962
DOI: 10.34220/issn.2222-7962/2021.3/8
Popis: An individual process of staining of each trunk occurs as a result of the long-term presence of wood in the river soil without oxygen access. It consists in changing the structure and chemical composition of the wood. There are industrial reserves of this wood on the territory of the Russian Federation, in the floodplains of a number of rivers. One of the most important tasks at the extraction stage is the primary individual quality assessment of the trunk. One of the most effective diagnostic indicators for assessing wood quality can be the number of annual layers in one centimeter. This indicator correlates well with wood density. The purpose of the research is to establish the influence of the macrostructure of natural wood and stained oak wood, changes in the microstructure on its density. It was found that the density of stained oak wood, depending on the number of annual layers in 1 cm, is about 10% higher than that of natural wood, all other things being equal. The magnitude and nature of the decrease in density along the radius of the trunk is the same as in natural wood. It is about 20%. The performed studies will allow making an express analysis of the quality of each stained wood trunk at the stage of making a decision on the behavior of its extraction. This will significantly reduce the cost of logging and primary processing of stained oak wood
Databáze: OpenAIRE