Design and construction of new axial‐flux permanent magnet motor
Autor: | Seyyed Mehdi Mirimani, Seyed Amin Saied, Mojtaba Alamdar Yazdi |
---|---|
Rok vydání: | 2020 |
Předmět: |
010302 applied physics
Materials science business.industry Rotor (electric) Stator 020208 electrical & electronic engineering 02 engineering and technology Structural engineering Counter-electromotive force 01 natural sciences Magnetic flux Finite element method law.invention Quantitative Biology::Subcellular Processes law Magnet 0103 physical sciences 0202 electrical engineering electronic engineering information engineering Torque Transient (oscillation) Electrical and Electronic Engineering business |
Zdroj: | IET Electric Power Applications. 14:2389-2394 |
ISSN: | 1751-8679 1751-8660 |
Popis: | The present study investigated the design, simulation, and manufacturing of a new coreless stator axial-flux permanent-magnet motor. In addition, to magnets with magnetisation along the motor axis, the new structure included magnets that were magnetised circumferentially and buried at the rotor surface. The electromagnetic design of the conventional axial-flux motor and the new motor was evaluated according to nominal values and design equations. In this regard, the number of poles and coils, as well as the outer diameter of both motors were assumed to be identical. It was observed that the axial length of the new motor is shorter than the conventional axial-flux motor. Simulations were continued through comparing the motors in terms of air-gap flux density, torque, and back electromotive force using the transient finite element method. A comparison of the results showed that the new motor had a better performance than the conventional axial-flux motor. Subsequently, the new motor was manufactured and tested; the experimental results proved to be close to those presented in the analytical section. |
Databáze: | OpenAIRE |
Externí odkaz: |