Quantifying elemental sulfur (S0), bisulfide (HS−) and polysulfides (Sx2−) using a voltammetric method

Autor: Stephen Theberge, George W. Luther, Tim F. Rozan
Rok vydání: 2000
Předmět:
Zdroj: Analytica Chimica Acta. 415:175-184
ISSN: 0003-2670
Popis: Free polysulfides (S42−), elemental sulfur (S0) and bisulfide (HS−) can be separated at discrete peak potentials using either cyclic voltammetry (CV) or linear sweep voltammetry (LS) with extremely fast scan rates. A scan rate of 1000 mV/s was found to be optimal for peak separation. Differences in the nucleophilic nature of Sx2− versus HS− and the electrochemical irreversibility of the S0 in Sx2− allowed for peak separation. For 10 μM solutions at a scan rate of 1000 mV/s, peak potentials were found to occur at −0.66 V for HS− and −0.69 V for S0. S42− was found to give two discrete peaks at −0.70 and −0.81 V, representing a two step mechanism. In mixed laboratory standards, all the three sulfur species were uniquely identified. Flectrochemical analyses revealed similar peak separation patterns under different environmental conditions, ranging from estuarine pore waters to hydrothermal vents. In estuarine sediments, the sulfur speciation was found to change throughout a core profile, with S0 dominant in the top layers (0–6 cm), Sx2− dominant in the transition zone (6–7 cm), and HS− dominant in the deeper sediment (>7 cm). In hydrothermal vent waters, different regions were observed to have different sulfur speciation. In diffuse flow regions away from chimneys containing trace O2 concentrations, polysulfides, elemental sulfur and bisulfide were discretely identified.
Databáze: OpenAIRE
Externí odkaz: