Influence of Microparticles on Setting Time and Micromorphology of Coal Ash Geopolymers
| Autor: | D D Burduhos Nergis, Mohd Mustafa Al Bakri Abdullah, Petrica Vizureanu, Mirabela Georgiana Minciună, D Țopa |
|---|---|
| Rok vydání: | 2020 |
| Předmět: | |
| Zdroj: | IOP Conference Series: Materials Science and Engineering. 877:012044 |
| ISSN: | 1757-899X 1757-8981 |
| DOI: | 10.1088/1757-899x/877/1/012044 |
| Popis: | Geopolymers are inorganic materials with zeolites-like microstructure and mechanical properties similar to those of Ordinary Portland cement materials [1]. However, their properties are highly depending on the constituents (raw material and activator) characteristics, as well as, on the activation particularities (mixing parameters, curing time and temperature etc.). In order to explore the influence of partial replacement of coal ash with two types of fine aggregates (glass and sand microparticles) on micromorphology and setting time, four types of geopolymers were developed. The evaluations were performed by means of electronic microscopy and Vicat method. According to this study, the coal ash replacement with glass microparticles results in an increase in the initial and the final setting time, while the replacement of coal ash with sand particles show a significant decrease. Moreover, the microstructural analysis shows different behaviour, during activation, of the studied microparticles. The surface of the glass microparticles reacts in the alkaline environment, while the sand particles did not. Therefore, the increase of initial and final setting time can be correlated with the dissolution of Si-O from the glass particles, during geopolymerisation. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|