Measurement of creep deformation of ex-service 12% Cr steel using digital image correlation
Autor: | Genevéve Marx, Thorsten Hermann Becker, Melody van Rooyen, J.E. Westraadt |
---|---|
Rok vydání: | 2020 |
Předmět: |
010302 applied physics
Service (business) Digital image correlation Computer science business.industry Applied Mathematics Mechanical Engineering 02 engineering and technology Structural engineering 021001 nanoscience & nanotechnology 01 natural sciences Power (physics) Creep Mechanics of Materials Modeling and Simulation Component (UML) 0103 physical sciences 0210 nano-technology business |
Zdroj: | The Journal of Strain Analysis for Engineering Design. 55:71-85 |
ISSN: | 2041-3130 0309-3247 |
DOI: | 10.1177/0309324720904517 |
Popis: | The effective operation of ageing coal-fired power plants requires routine damage assessment of critical component materials throughout their service history. Traditional post-exposure mechanical testing typically requires large amounts of material for each testing condition. This study introduces an accelerated (high stress and temperature) creep testing technique that employs digital image correlation for strain measurement over a non-uniform temperature field generated by a thermomechanical tester. When applied to different ex-service (exposed to service conditions within a power plant) 12% Cr piping steels, multiple accelerated creep curves at temperatures ranging from 550°C to 600°C are measured from a single specimen for each material condition. Higher creep damage in the steel due to longer service exposure and higher void densities is revealed by shorter rupture times, faster creep rates and tertiary-dominated creep curves when compared to the lower creep damage state. Microstructural study via quantitative electron microscopy confirms the dislocation creep-driven growth of subgrains in the specimen gauge regions relative to the grips. Larger subgrains and a weakening of precipitate distributions for the high damage material were also noted. Digital image correlation–measured strains are in good agreement with traditional techniques of creep testing with standard extensometry. On a comparative basis, the technique is shown to be a plausible form of damage assessment of 12% Cr piping steels with varying levels of service exposure and serve as a suitable mechanical complement to the traditional void replica methodology. |
Databáze: | OpenAIRE |
Externí odkaz: |