Lapped-steel effects on bridge pier behavior under moderate near-fault motions
| Autor: | Ho J. Shin, Young Soo Chung, Yong K. Park, Sang Y. Lee |
|---|---|
| Rok vydání: | 2015 |
| Předmět: |
Pier
geography geography.geographical_feature_category business.industry 0211 other engineering and technologies 020101 civil engineering 02 engineering and technology Structural engineering Fault (geology) Induced seismicity Dissipation Displacement (vector) 0201 civil engineering Splice joint 021105 building & construction Earthquake shaking table Geotechnical engineering Ductility business Geology Civil and Structural Engineering |
| Zdroj: | KSCE Journal of Civil Engineering. 20:1452-1461 |
| ISSN: | 1976-3808 1226-7988 |
| DOI: | 10.1007/s12205-015-0795-0 |
| Popis: | Extensive research for the Far Fault Ground Motion (FFGM) has been carried out in strong seismic regions, but limited research has been done for the Near Fault Ground Motion (NFGM) because of very few records. Shake table tests for NFGM were conducted to investigate the seismic behavior of Reinforced Concrete (RC) bridge columns with lap-spliced longitudinal bars that are designed in low or moderate seismic region. Seven RC column specimens with a height of 1400 mm (55.2 in) and a diameter of 400 mm (15.8 in) were tested on a shaking table, and one alike specimen was quasi-statically tested. The effect on lap-spliced longitudinal reinforcing steel was investigated. Shaking test results are compared to those of the quasi-static test. The displacement ductility was significantly decreased in RC column specimens with lap-spliced longitudinal reinforcing bars. The effect of NFGM is compared to that of FFGM. The NFGM specimen showed somewhat less seismic capacity than the FFGM model from Fig. 4(d). Decrease of displacement ductility and energy dissipation was observed in the shake table test specimens in comparison with the quasi-static model. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|
Full text from SpringerLink