Ignition and flame stabilisation of primary reference fuel sprays at engine-relevant conditions

Autor: Aleš Srna, Evatt R. Hawkes, Guanxiong Zhai, Sensen Xing, Armin Wehrfritz, Qing Nian Chan, Sanghoon Kook
Rok vydání: 2021
Předmět:
Zdroj: Combustion and Flame. 233:111620
ISSN: 0010-2180
DOI: 10.1016/j.combustflame.2021.111620
Popis: This study aims to investigate the underlying processes governing ignition and flame stabilisation in compression-ignition (CI) engine-relevant conditions. The experiments feature a canonical configuration with a single fuel jet injected into a constant-volume combustion chamber. Primary reference fuels (PRFs), including PRF100 (neat iso-octane, a gasoline surrogate), PRF80 (a blend of 80 vol.% iso-octane and 20 vol.% n-heptane) and PRF0 (neat n-heptane, a diesel surrogate), were tested to simulate changes in fuel ignition quality inside a quiescent steady environment with an ambient density of 22.8 kg/m3 and an O 2 concentration of 15 vol.%. The ambient gas temperatures were controlled at 1150 K (PRF100), 1120 K (PRF80) and 900 K (PRF0), in order to adapt to the fuel reactivity so that a constant ignition delay of 1.15 ms can be achieved for all blends. This approach was employed in order to substantially reduce the effect of fuel-oxidiser mixing prior to ignition while highlighting the effect of fuel chemistry on the ignition process and flame evolution. Under the test conditions of this study, optical imaging reveals that the blends with higher iso-octane content exhibit a faster spreading of combustion after ignition and establish a steady lifted flame that is closer to the nozzle. Imaging by CH 2 O-PLIF indicates that blends with higher iso-octane content produce CH 2 O that is distributed across larger portions of the jet at an earlier timing when compared to neat n-heptane that shows a propagating first-stage ignition through the fuel jet. Supporting unsteady flamelet calculations are presented to investigate the effect of chemistry and turbulent mixing. The flamelet calculations agree qualitatively in several respects to the experiments, especially in the spatial and temporal trends for CH 2 O production and consumption. Synthesis of the flamelet and experimental results suggests that for the iso-octane-containing fuels, CH 2 O is formed via single-stage ignition reactions rather than exhibiting the typical two-stage ignition behaviour which is found in the pure n-heptane fuel case. Furthermore, the flamelet calculations suggest high-temperature ignition occurs first in lean mixtures in the iso-octane-containing fuel cases, but in rich mixtures for the PRF0 case. If autoignition is the mode of flame stabilisation, this provides an explanation for why the PRF100 and PRF80 cases stabilise further upstream, since lean mixtures have longer residence times, experience lower scalar dissipation rate, and may be more likely to be exposed to a supporting peripheral reservoir of hot products, should one exist. Overall, this study provides insights into the roles of fuel chemistry and turbulent mixing on the ignition and combustion behaviour of PRFs under engine-relevant conditions.
Databáze: OpenAIRE
Externí odkaz: