Properties of Particleboards Produced from Poppy (Papaver somniferum L.) Stalks
| Autor: | Mustafa Burak Arslan, Halil Turgut Sahin |
|---|---|
| Rok vydání: | 2016 |
| Předmět: |
0106 biological sciences
Materials science biology 020502 materials Young's modulus 02 engineering and technology General Medicine Raw material biology.organism_classification 01 natural sciences Original research symbols.namesake 0205 materials engineering Flexural strength Poppy 010608 biotechnology Papaver medicine symbols Adhesive Swelling medicine.symptom Composite material |
| Zdroj: | Journal of Advances in Biology & Biotechnology. 6:1-6 |
| ISSN: | 2394-1081 |
| DOI: | 10.9734/jabb/2016/24977 |
| Popis: | The objective of this work was to examine the suitability of poppy stalks for particleboard manufacturing. One-layer experimental panel with density of 0.45; 0.55 and 0.65 g/cm made from poppy stalks utilizing 8-10% urea-formaldehyde (UF) resin. The experimental boards were evaluated for Modulus of Rupture (MOR), Modulus of Elasticity (MOE), Internal Bond strength (IB), Surface Strength (SS), Thickness Swelling (TS) according to related standards. The mechanical properties of boards shown that poppy stalks could be an appropriate raw material for particleboards production. The result clearly indicated that mechanical properties of poppy based boards improved with an increase panel density and adhesive ratio. Panels produced 0.55 g/cm density with 10% UF adhesive and 0.65 g/cm density with 8% UF adhesive exceed TS EN standard for MOR, MOE, IB, and SS properties. Original Research Article Arslan and Sahin; JABB, 6(2): 1-6, 2016; Article no.JABB.24977 2 |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|