Development of a Hybrid Power Supply and RF Transmission Line for SANAEM RFQ Accelerator
| Autor: | Ogur, Salim, Ahiska, Fatih, Alacakir, Ali, Turemen, Gorkem, Unel, Gokhan |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2015 |
| Předmět: | |
| DOI: | 10.18429/jacow-ipac2015-wepha051 |
| Popis: | SANAEM Project Prometheus (SPP) has been building a proton beamline at MeV range. Its proton source, two solenoids, and a low energy diagnostic box have been already manufactured and installed. These are going to be followed by a 4-vane RFQ to be powered by two stage PSU. The first stage is a custom-built solid state amplifier providing 6 kW at 352.2 MHz operating frequency. The second stage, employing TH 595 tetrodes from Thales, will amplify this input to 160 kW in a short pulsed mode. The power transfer to the RFQ will be achieved by the means of a number of WR2300 full and half height waveguides, 3 1/8" rigid coaxial cables, joined by appropriate adapters and converters and by a custom design circulator. This paper summarizes the experience acquired during the design and the production of these components. Proceedings of the 6th Int. Particle Accelerator Conf., IPAC2015, Richmond, VA, USA |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|