Acoustic microscopy signal processing method for detecting near-surface defects in metal materials
| Autor: | Chenxing Gao, Min Li, Xue Li, Yanan Song |
|---|---|
| Rok vydání: | 2019 |
| Předmět: |
010302 applied physics
Imagination Signal processing Materials science Pulse (signal processing) Mechanical Engineering Acoustics media_common.quotation_subject Echo (computing) Acoustic microscopy Condensed Matter Physics 01 natural sciences Background noise Amplitude 0103 physical sciences General Materials Science Ultrasonic sensor 010301 acoustics media_common |
| Zdroj: | NDT & E International. 103:130-144 |
| ISSN: | 0963-8695 |
| Popis: | When ultrasonic pulse echo technique is used for the detection of defects in materials, the amplitude of the defect echo is considerably lower than that of the interface echo, and the echo generated by the defect in the near-surface always overlaps with the interface echo, leading to the difficult extraction of defect characteristics in the near-surface of a material. Therefore, a method combining adaptive morphological filtering with sparse minimum entropy deconvolution (M-S-MED) was proposed. First, adaptive morphological filtering was applied for the removal of background noise and for making the defect echo obvious. Then, sparse minimum entropy deconvolution was performed on the characteristic signals for the acquisition of the reflected pulse sequences of ultrasonic signals. The depth and size of the defect were accurately evaluated because of the effective separation of the interface and defect echoes. The effectiveness of the proposed method was validated by simulating the signals and detecting a near-surface defect in an actual galvanized sheet. The experimental result revealed that the depth and size errors of the actual defect were 1.9% and 3.5%, respectively. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|
Full Text from ScienceDirect