Thermal spray vitrification process for the removal of lead-based paint from steel structures: An applications note

Autor: A. Kumar, L. D. Stephenson, J. Boy
Rok vydání: 2004
Předmět:
Zdroj: Journal of Thermal Spray Technology. 13:121-125
ISSN: 1544-1016
1059-9630
DOI: 10.1007/s11666-004-0056-0
Popis: Lead-based paints and primers have long been used to protect steel structures from corrosion, but are now recognized as environmental hazards. During lead-based paint removal via abrasive blasting, federal, state and local environmental requirements mandate the use of containment structures to prevent contamination of air, soil, or water. The thermal spray vitrification (TSV) process was developed and optimized in laboratory experiments to remove hazardous lead-based paint. TSV consists of thermal spraying a molten glass onto the painted surface. As the glass strikes the substrate, it reacts with the paint, and organic components are pyrolyzed, while lead ions are trapped on the glass surface. Quenching stresses in the glass cause it to crack and spall off the substrate. The resulting glass fragments are collected, and further remelted to completely immobilize lead (Pb) ions in the glassy iron (Fe) silicate matrix. The glass waste is thus rendered non-hazardous, as determined by the Toxicity Characteristic Leaching Procedure (TCLP). The TSV process was field tested on a fire hydrant, using minimal personal protective equipment and without using a containment structure. The lead-containing paint was removed, without producing hazardous waste, leaving de-painted surfaces suitable for repainting.
Databáze: OpenAIRE
Externí odkaz: