Thermal performance modeling of turbulent flow in multi tube in tube helically coiled heat exchangers
| Autor: | Abdullah S. Bin-Mahfouz, H.A. Refaey, Sameh A. Nada, H.F. Elattar, A. Fouda |
|---|---|
| Rok vydání: | 2018 |
| Předmět: |
Materials science
Turbulence 020209 energy Mechanical Engineering Reynolds number 02 engineering and technology Mechanics Heat transfer coefficient 021001 nanoscience & nanotechnology Condensed Matter Physics symbols.namesake Mechanics of Materials Electromagnetic coil Heat transfer Thermal Heat exchanger 0202 electrical engineering electronic engineering information engineering symbols General Materials Science Tube (fluid conveyance) 0210 nano-technology Civil and Structural Engineering |
| Zdroj: | International Journal of Mechanical Sciences. 135:621-638 |
| ISSN: | 0020-7403 |
| DOI: | 10.1016/j.ijmecsci.2017.12.015 |
| Popis: | Heat transfer characteristics and performances of a multi tubes in tube helically coiled (MTTHC) heat exchanger are numerically investigated. The effects of operating and geometrical parameters on the thermal and hydrodynamic performances of the coil are studied and presented for turbulent flow regimes. The current simulation model is compared and validated with available experimental results and a good agreement is obtained. The numerical results showed that, the overall heat transfer coefficient (Uo) enhanced by 23% and 28% with increasing Reynolds numbers of hot and cold water (Rehw and Recw) from 9000 to17000 and 14,000 to 22,000, respectively. Coil effectiveness (e) increased by 28% and 60% with increasing coil diameter (Dc) from 100–150 mm and 100 to 250 mm, respectively and increased with 20% with increasing the number of inner tubes (N) from 1 to 5. Moreover, the maximum values of the thermal-hydrodynamic performance index and coil effectiveness occurs at N = 3. The coil pitch has slight effect on the coil performance. Comparisons between the presented MTTHC with concentric tube in tube helically coiled (CTTHC) and multi tubes in straight tube (MTST) heat exchangers are conducted and showed that MTTHC heat exchangers displayed higher thermal performance. General numerical correlations for thermal and hydraulic coil performance are developed within acceptable errors. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|
Full Text from ScienceDirect