Induction diffusion brazing of copper to aluminium
| Autor: | Xingeng Li, Chuanwei Wang, Wang Xuegang, Fengjie Yan |
|---|---|
| Rok vydání: | 2016 |
| Předmět: |
010302 applied physics
Materials science Metallurgy Intermetallic Oxide chemistry.chemical_element 02 engineering and technology 5005 aluminium alloy 021001 nanoscience & nanotechnology Condensed Matter Physics 01 natural sciences Copper chemistry.chemical_compound chemistry Aluminium 0103 physical sciences 5052 aluminium alloy Brazing 6063 aluminium alloy General Materials Science Composite material 0210 nano-technology |
| Zdroj: | Science and Technology of Welding and Joining. 22:170-175 |
| ISSN: | 1743-2936 1362-1718 |
| DOI: | 10.1080/13621718.2016.1209625 |
| Popis: | The aim of this research was to develop an induction diffusion brazing to obtain a sound joint between copper and aluminium. A foil interlayer was used to bond copper to aluminium at 600°C for 2 s under a bonding pressure of 9 MPa. The failure of tensile test is in the aluminium side and no failure occurs when the joint is bent to 180°. The electrical resistivity of joint is lower than that of aluminium. The interfacial intermetallic compounds layers are Cu9Al4 and CuAl2 with the total thickness of 2 μm. No voids and oxide scale are found in the joint. Heat treatment shows that induction diffusion brazing is superior to conventional flash welding to maintain electrical stability and mechanical integrity of copper to aluminium joint. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|