Cementites decomposition of a pearlitic ductile cast iron during graphitization annealing heat treatment

Autor: Jun-hua You, Li Guanglong, Ying-dong Qu, Rongde Li, Gao Minqiang
Rok vydání: 2017
Předmět:
Zdroj: Journal of Iron and Steel Research International. 24:838-843
ISSN: 2210-3988
1006-706X
DOI: 10.1016/s1006-706x(17)30124-3
Popis: Cementites decomposition of a pearlitic ductile cast iron during graphitization annealing heat treatment was investigated. Fractographies and microstructures of heat treated samples were observed using a scanning electron microscope and mechanical properties were measured by a universal tensile test machine. The results indicated that during isothermal annealing at 750 °C, the tensile strength of pearlitic ductile cast iron was increased to a peak value at 0.5 h, and decreased gradually thereafter but the elongation was enhanced with the increase of annealing time. Moreover, the diffusion coefficient of carbon atoms could be approximately calculated as 0.56 µm2/s that could be regarded as the shortrange diffusion. As the holding time was short (0. 5 h), diffusion of carbon atoms was incomplete and mainly occurred around the graphites where the morphology of cementites changed from fragmentized shape to granular shape. In addition, the ductile cast iron with tensile strength of 740 MPa and elongation of 7% could be achieved after graphitization annealing heat treatment for 0. 5 h. Two principal factors should be taken into account. First, the decomposition of a small amount of cementites was beneficial for increasing the ductility up to elongation of 7%. Second, the diffusion of carbon atoms from cementites to graphites could improve the binding force between graphites and matrix, enhancing the tensile strength to 740 MPa.
Databáze: OpenAIRE
Externí odkaz: