Theoretical and experimental studies on two-phase thermosyphon shell and shell heat exchangers
| Autor: | Fernando Milanese, Andrés P. Sarmiento, Marcia B. H. Mantelli, V.R. Miranda |
|---|---|
| Rok vydání: | 2020 |
| Předmět: |
Work (thermodynamics)
Materials science 020209 energy Mass flow Prandtl number Shell (structure) Energy Engineering and Power Technology 02 engineering and technology Mechanics Nusselt number Industrial and Manufacturing Engineering Physics::Fluid Dynamics symbols.namesake 020401 chemical engineering Heat exchanger Heat transfer 0202 electrical engineering electronic engineering information engineering symbols Thermosiphon 0204 chemical engineering |
| Zdroj: | Applied Thermal Engineering. 171:115092 |
| ISSN: | 1359-4311 |
| DOI: | 10.1016/j.applthermaleng.2020.115092 |
| Popis: | This work presents theoretical and experimental analyses on a shell and shell heat exchanger assisted by two-phase thermosyphons. This heat exchanger consists of two adjacent cylindrical shells that enclose a bank of two-phase thermosyphons. A prototype was built and tested as a water cooler for oils with different ranges of viscosity. A theoretical model is developed to predict the heat transfer rate. It combines the Bell-Delaware method for the shell side, the equivalent thermal circuit model for the two-phase thermosyphon and a proposed thermal coupling algorithm. The prototype was tested for several mass flow rates and inlet temperature levels of commercial thermal oil and a very viscous petroleum sample. Comparisons between the proposed model and the experimental data showed that the proposed model can predict the experimental heat transfer rate with an overall root mean square error of 20%, despite the use of literature correlations for the Nusselt number of a cross-flow over a tube bank out of their Prandtl number range, as very viscous fluids were tested. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|
Full Text from ScienceDirect