Dip Coating From Density Mismatching Mixture
| Autor: | A. M. M. Nazmul Ahsan, S. M. Naser Shovon, Bashir Khoda |
|---|---|
| Rok vydání: | 2021 |
| Předmět: |
0209 industrial biotechnology
020901 industrial engineering & automation Materials science Mechanics of Materials Process Chemistry and Technology 02 engineering and technology Composite material Particulates 021001 nanoscience & nanotechnology 0210 nano-technology Dip-coating Industrial and Manufacturing Engineering |
| Zdroj: | Journal of Micro and Nano-Manufacturing. 9 |
| ISSN: | 2166-0476 2166-0468 |
| DOI: | 10.1115/1.4051260 |
| Popis: | Solid transfer technology from mixtures is gaining ever-increasing attention from materials scientists and production engineers due to their high potential in near-net-shaped production of cost-effective engineering components. Dip coating, a wet deposition method, is an effective and straightforward way of thin-film/layers formation. The dipping mixtures are often embedded with inorganic fillers, nanoparticles, or clusters (d 1 μm) or adding a higher solid fraction will increase the solid transfer but may result in a multiphase heterogeneous mixture. In this work, the physical mechanism of an increased volume of solid transfer with a larger spherical particle size (>5 μm) is investigated. Polymer-based glue and evaporating solvent are mixed to construct the liquid carrier system (LCS) for large inorganic hard particles. Moderate volume fraction of inorganic particles (20% |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|