Hybrid resins from polyisocyanate/vinyl ester/water glass systems: Structure and properties
| Autor: | S. Grishchuk, József Karger-Kocsis, N. Castellà |
|---|---|
| Rok vydání: | 2007 |
| Předmět: |
Bisphenol A
Thermogravimetric analysis Materials science Polymers and Plastics Organic Chemistry Vinyl ester General Physics and Astronomy Dynamic mechanical analysis Isocyanate Limiting oxygen index chemistry.chemical_compound chemistry Chemical engineering Materials Chemistry Composite material Thermal analysis Polyurea |
| Zdroj: | European Polymer Journal. 43:1245-1257 |
| ISSN: | 0014-3057 |
| DOI: | 10.1016/j.eurpolymj.2007.01.010 |
| Popis: | Polysilicate modified polyurea/vinyl ester hybrid resins were produced by dispersing water glass (WG) in a mixture of vinyl ester (VE) and polyisocyanate in presence of a liquid phosphate as emulsifier. As styrene-crosslinkable VE resins bisphenol A (BA) and novolac types (N), whereas as polyisocyanate a polymeric methylene diphenyl isocyanate (PMDI) were used. The structure and selected properties of the hybrid resins were determined and compared to those of the neat VEs and polysilicate filled polyurea (denoted as 3P resin). Using VE for resin hybridization, which worked as an additional emulsifier for the WG/PMDI/phosphate system, resulted in a fine particle dispersion of the polysilicate. It was found that the type of VE affected not only the dispersion of WG (and thus of the polysilicate) but also the network formation of the polyurea/VE hybrids and their properties. Information about the structure of the polysilicate filled hybrid resins was gained from dynamic-mechanical thermal analysis (DMTA), scanning electron and atomic force microscopic measurements. It was argued that the resin hybridization yielded a conetwork instead of an interpenetrating one. The properties of the hybrid systems were determined by DMTA, fracture mechanical tests, thermogravimetric analysis and flammability measurements. It was established that the stiffness and resistance to thermal degradation of the initial 3P resin was strongly improved by hybridization with VEs. The fracture toughness (Kc) proved to be less sensitive to the formulation of the hybrid resins. On the other hand, the fracture energy (Gc) and limiting oxygen index experienced a positive deviation from the additivity as a function of the 3P/VE composition, at least in a given range. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|
Full Text from ScienceDirect