A talajok mechanikai összetétel vizsgálata pipettás ülepítéses módszerrel: a hazai és a nemzetközi szabvány szerinti eljárások összehasonlítása és konverziója
| Autor: | Réka Balázs, Zsófia Bakacsi, Brigitta Tóth, Gyöngyi Barna, Viktória Labancz, Hilda Hernádi, András Makó, Sándor Molnár |
|---|---|
| Rok vydání: | 2017 |
| Předmět: | |
| Zdroj: | Agrokémia és Talajtan. 66:295-315 |
| ISSN: | 1588-2713 0002-1873 |
| DOI: | 10.1556/0088.2017.66.2.1 |
| Popis: | The particle size distribution (PSD) values obtained for a soil database representing the main Hungarian soil types using the Hungarian standard (MSZ-08-0205-78) and the international standard (ISO/DIS 11277:1994) were compared with the pipette method. The relationship between these PSDs and other physical soil characteristics (upper limit of plasticity according to Arany, water vapour adsorption according to Sík) was also analysed, and a suggestion was made of how these results could be converted into each other. Experience showed that the pre-treatments applied as part of the ISO/DIS method may change the ratio of particle size fractions: there was a significant increase in the clay content, while the silt content decreased to a lesser and the sand content to a greater extent, possibly because some of the particles remain in microaggregate form when the MSZ method is used. The results confirmed the greater accuracy of the ISO/DIS method: the clay contents measured with the ISO/DIS method exhibited stronger correlations with the upper limit of plasticity according to Arany and with hygroscopicity values than those measured with the MSZ method. The estimated ISO/DIS fractions became much closer to the measured ones when the suggested pedotransfer functions were applied. The conversion method proved to be more reliable for the prediction of clay and sand content than for silt content. In its present form the estimation method is not suitable for replacing the ISO/DIS method, but it could be of good service in research and comparative analysis in cases where only the MSZ method can be used or where only old MSZ PSD data exist. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|