Investigate the effect of nano cutting fluid and cutting parameters under minimum quantity lubrication (MQL) on surface roughness in turning of DSS-2205
| Autor: | S.T. Prashantha Kumar, H.P. Thirtha Prasada |
|---|---|
| Rok vydání: | 2021 |
| Předmět: |
010302 applied physics
Copper oxide Materials science technology industry and agriculture 02 engineering and technology Surface finish 021001 nanoscience & nanotechnology 01 natural sciences chemistry.chemical_compound Nanofluid chemistry 0103 physical sciences Nano Surface roughness Silicon carbide Lubrication Composite material Cutting fluid 0210 nano-technology |
| Zdroj: | Materials Today: Proceedings. 43:3643-3649 |
| ISSN: | 2214-7853 |
| Popis: | The Paper focused on Effect of Nano cutting fluids under minimum quantity lubrication (MQL) and parameters on surface roughness during turning of Duplex stainless steel-2205. The Nanofluids are prepared via two step processes dispersing the nano particles of Aluminium oxide (Al2O3), Copper oxide (CuO) and Silicon carbide (SiC) with the base fluid of Neat Cut oil with different volume concentration 0.3%, 0.5% and 0.7%. The experimentation were conducted based on face centered composite design(CCF) with varying % of volume concentration of nano particles, speed, feed and depth of cut. ANOVA was used to examine the influence of turning factors on roughness. The ANOVA and R-Squared value reveals the developed models were significant. The results revealed that copper oxide nano fluid are better surface roughness fallowed by silicon carbide and aluminium oxide and feed was the most significant factor followed by DOC, concentration of nano particles and cutting speed. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|
Full Text from ScienceDirect