Environmental stress cracking behaviour of urethane methacrylate based resins

Autor: Jianjun Li, D. H. Isaac, J. C. Arnold
Rok vydání: 1994
Předmět:
Zdroj: Journal of Materials Science. 29:3095-3101
ISSN: 1573-4803
0022-2461
DOI: 10.1007/bf00356650
Popis: Two kinds of cross-linked urethane methacrylate resins have been investigated using three-point bend tests to determine their environmental stress cracking (ESC) behaviour in a range of liquids (water, sodium hydroxide, ethylene glycol, acetonitrile, acetic acid, acetone, tetrahydrofuran, toluene, 3,5,5-trimethylhexanol and petrol). The resins were found to undergo ESC in organic liquids only, and the critical strains, ɛc, and critical stresses, σc, have been related to the solubility parameters, δ, of the liquid environments. The most severe ESC was observed in solvents with δ−19–20 MPa1/2, corresponding to minimum points in the plots of ɛc and σc against δ. Generally, the resin with the higher cross-link density had a greater resistance to ESC, but the effect of liquid diffusion complicated the situation and was found to play an important role in the ESC behaviour of these materials. The results confirmed that liquid diffusion into the resins lowered the critical strain (and stress), leading to earlier failure. In the case of the lower cross-link density resin, very fast diffusion was found to cause softening. However, it was noted that liquid diffusion can also blunt crazes and cracks.
Databáze: OpenAIRE
Externí odkaz: