Kinematic process and mechanism of the two slope failures at Baige Village in the upper reaches of the Jinsha River, China

Autor: Sai Wang, Fei Chen, Zhiqiu Yu, Zongliang Li, Zhongkang Yang, Siyuan Zhao, Renji Ba, Yunjian Gao, Jianhui Deng
Rok vydání: 2021
Předmět:
Zdroj: Bulletin of Engineering Geology and the Environment. 80:3475-3493
ISSN: 1435-9537
1435-9529
Popis: On Oct. 10 and Nov. 3, 2018, two landslides, i.e., the “10.10” and “11.3” rockslides, occurred successively at Baige Village, Jiangda County, Tibetan Autonomous Region, P. R. China. The two landslides are located in the upper reaches of the Jinsha River and both dammed the river. Immediately since the slides, the authors have been working on the slides and help disaster reduction. Based on the data collected by April 2020, this paper is aimed at clarifying the geological condition of the slides and at explaining why the slides occurred and what the whole sliding process was. Conclusions are summarized as follows. First, the two landslides occurred in the suture belt of the Jinsha River and the rocks are composed of tectonic melange slices of mainly gneiss intermingled with carboniferous slate and marble and with intruded serpentine and granite porphyry. The gneiss generally bears a schistosity plane with an averaged attitude of N47° W/47°, dipping into the slope. Secondly, long-term geomorphological evolution of the bank slope due to river incision contributed to the progressive slope deformation for the development of the “10.10” rockslide. No preferential joints exist in the slope, but alteration and weathering played important roles in its occurrences. Rainfall and earthquakes may also accelerate its deformation. Thirdly, the “10.10” rockslide is of high-speed wedge-like slope failure with a high-position and a high-shear outlet. Its sliding and deposition process demonstrate special features as initial speed, collision between debris, surging waterjet, and second slipping. Fourthly, the whole process of the “10.10” rockslide can be divided into 6 steps, i.e., startup of the major sliding and sliding resistance zones, sliding initiation of the trailing zone, formation of debris-eroded zones, collision of debris and triggering waterjet and mist, secondary slip of the landslide dam, and surface flush in the deposition area. The estimated speed may reach as high as 67 m/s. Fifthly, the “11.3” rockslide follows a different mode, i.e., wedge cleaving effect. And finally, the cracked zones still have the risk to constitute a potential landslide and to dam the river again.
Databáze: OpenAIRE
Externí odkaz: