Impact of fuel/oxidizer ratio of NaN3 and KNO3 airbag gas generants on toxic emission and performance
Autor: | Aravind Surendran Lathika, Balasubramanian Karuppudaiyar Ramasamy, Surianarayanan Mahadevan, Sivapirakasam Suthangathan Paramashivan |
---|---|
Rok vydání: | 2020 |
Předmět: |
021110 strategic
defence & security studies Environmental Engineering Materials science Ideal gas law General Chemical Engineering 0211 other engineering and technologies Analytical chemistry 02 engineering and technology 010501 environmental sciences 01 natural sciences Decomposition law.invention Thermogravimetry Ignition system Differential scanning calorimetry Volume (thermodynamics) law Thermal Environmental Chemistry Safety Risk Reliability and Quality Adiabatic process 0105 earth and related environmental sciences |
Zdroj: | Process Safety and Environmental Protection. 133:348-357 |
ISSN: | 0957-5820 |
DOI: | 10.1016/j.psep.2019.11.015 |
Popis: | This paper reports the experimental methodology to arrive at an optimal weight composition of NaN3/KNO3 airbag gas generants based on thermal studies using Differential Scanning Calorimetry/Thermogravimetry analysis. The residual analysis showed that the fuel oxidizer mixture of 62.5/37.5 by weight percentage can be used as the optimal composition for airbag gas generants, as it produced minimum residues after decomposition reaction. Spectroscopic studies using SEM-EDS showed that the optimal composition had zero residues of toxic NaN3 compared to all other compositions tested. The heat energy released was found to be more in the air atmosphere due to the complete decomposition of mixtures compared to the nitrogen atmosphere. In this study, the ballistic properties such as time to peak pressure and peak pressure generated on ignition of the mixture were measured using the closed vessel test and the 28.3 lit full-fledged tank test. For the first time, the maximum pressure developed during decomposition of the fuel/oxidizer mixtures on the closed vessel test was compared with the theoretical maximum pressure value calculated using the ideal gas equation assuming that the process was adiabatic. The applicability of using the constant volume closed vessel test chamber for performance testing of auto airbag systems was also addressed. |
Databáze: | OpenAIRE |
Externí odkaz: |