Numerical investigation on NOX formation in oxygen-CH4 MILD combustion with air leakage
| Autor: | Sang-Soon Hwang, Ho-Yeon Lee, Chun-Loon Cha |
|---|---|
| Rok vydání: | 2019 |
| Předmět: |
Materials science
020209 energy Mechanical Engineering Analytical chemistry chemistry.chemical_element 02 engineering and technology Dissipation Combustion Oxygen Dilution 020303 mechanical engineering & transports 0203 mechanical engineering chemistry Mechanics of Materials 0202 electrical engineering electronic engineering information engineering Combustor Limiting oxygen concentration Reynolds-averaged Navier–Stokes equations NOx |
| Zdroj: | Journal of Mechanical Science and Technology. 33:3733-3741 |
| ISSN: | 1976-3824 1738-494X |
| DOI: | 10.1007/s12206-019-0715-1 |
| Popis: | In this paper, we focus on formation of NOX under oxy-fuel MILD combustion using JHC (jet-in hot co-flow) burner. The effect of the different oxygen dilution ratio in the co-flow is analyzed for MILD combustion formation and also for characterizing NOX emission. RANS (Reynolds averaged Navier Stokes) with the modified k-e equation and EDC (eddy dissipation concept) model were applied for 2D-axisymmetric computational domain using the Ansys Fluent. It is found that the effect of the oxygen concentration rather than the composition of dilution gas is more significant for the formation of the MILD combustion and as the oxygen concentration of the dilution gas increases under MILD combustion conditions, the region with Da < 1 expressed as MILD regime tends to be decreased. The effect of a diluted oxygen concentration in the oxy-fuel combustion on NOx emission under MILD condition is found to be much greater than the amount of air leakage into co-flow, and NO emissions are almost unaffected by the increase of N2 concentration in case of MILD combustion condition within practical air leak ranges. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|
Full text from SpringerLink