Tin alloy coating of aluminium bearings by brush plating
| Autor: | D. R. Eastham, M. Turner, J. K. Dennis |
|---|---|
| Rok vydání: | 1992 |
| Předmět: |
010302 applied physics
Materials science 020209 energy Metallurgy Metals and Alloys chemistry.chemical_element 02 engineering and technology Surfaces and Interfaces Condensed Matter Physics Combustion 01 natural sciences Surfaces Coatings and Films Nickel chemistry Mechanics of Materials Aluminium visual_art Plating 0103 physical sciences 0202 electrical engineering electronic engineering information engineering Aluminium alloy visual_art.visual_art_medium Tin Crankpin Zincate |
| Zdroj: | Transactions of the IMF. 70:32-37 |
| ISSN: | 1745-9192 0020-2967 |
| DOI: | 10.1080/00202967.1992.11870938 |
| Popis: | To meet the growing requirements for higher performance internal combustion engines, high strength, light aluminium alloy crank pin bearings are required to be plated with lead-tin, lead-tin-copper or lead-indium overlays. To achieve good adhesion the conventional zincate plus nickel strike route is employed. However, there is some evidence that nickel has undesirable seizure properties, and it would, therefore, be beneficial if it could be eliminated from the product. The objective of this work was to devise an improved plating process taking account of this problem |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|