A catalytic reactive distillation approach to high density polyethylene pyrolysis – Part 2 – Middle olefin production
Autor: | Everton R.F. dos Santos, Francisco Lemos, Manda Lemos, Bruna Rijo |
---|---|
Rok vydání: | 2021 |
Předmět: |
Wax
Olefin fiber Materials science Fraction (chemistry) 02 engineering and technology General Chemistry Raw material 010402 general chemistry 021001 nanoscience & nanotechnology 01 natural sciences Catalysis 0104 chemical sciences Chemical engineering visual_art Reactive distillation visual_art.visual_art_medium High-density polyethylene 0210 nano-technology Pyrolysis |
Zdroj: | Catalysis Today. 379:212-221 |
ISSN: | 0920-5861 |
Popis: | A catalytic reactive distillation reactor, previously described, was improved to increase the production of middle and heavy hydrocarbons, to be used as feedstock or fuel in the viewpoint of a Circular Economy of plastics. The thermal and catalytic pyrolysis experiments were run using high density polyethylene (HDPE) under several experimental conditions, with a 1 % (w/w) of HZSM-5 for catalytic pyrolysis. Three different temperatures were tested in each case and the influence of the reaction time was evaluated at 500 °C and 430 °C for thermal pyrolysis and catalytic pyrolysis, respectively. Thermal pyrolysis of HDPE produced the higher amount of solid products (80 %wt. or higher) under the form of a waxy cream-colored material (wax) for all the experimental sets. For catalytic pyrolysis, the major product fraction was always liquid. The analysis of the liquid products showed that, for both thermal and catalytic pyrolysis, the products obtained were within the range of C5 to C11, with a higher yield on C8 and C9 in the case of thermal pyrolysis and on C6 and C7 for catalytic pyrolysis. The aim of this study was the development of an integrated reactor/separation system to increase the middle olefin production. It is possible with this reactor design to direct the pyrolysis of HDPE to the production of middle olefins that can be reused in the petrochemistry industry, as chemical feedstock, including in the production of new plastics. |
Databáze: | OpenAIRE |
Externí odkaz: |