Meso-scale studies on the penetration and retention of diluted bitumen in different types of shorelines, Northern British Columbia, Canada
| Autor: | Gary A. Sergy, John R. Harper, Patrick Lambert, Sonia Laforest |
|---|---|
| Rok vydání: | 2017 |
| Předmět: |
0106 biological sciences
Shore geography geography.geographical_feature_category Petroleum engineering 010604 marine biology & hydrobiology Dilbit Penetration (firestop) 010501 environmental sciences 01 natural sciences Meso scale Asphalt Geotechnical engineering 0105 earth and related environmental sciences |
| Zdroj: | International Oil Spill Conference Proceedings. 2017:2268-2285 |
| ISSN: | 2169-3358 2169-3366 |
| Popis: | 2017-210 Compared to conventional oil, diluted bitumen (dilbit) spills in the environment could be challenging due to the rapid increase in density, viscosity and adhesion properties associated with accelerated weathering. To enhance the response in case of an accidental dilbit spill in the marine environment, a Research & Development program has been developed by the Emergencies Science and Technology Section (ESTS) of Environment and Climate Change Canada (ECCC) as a part of the Federal Government’s Enhancing Marine Safety Strategy. One of the goals of this project was to develop science-based decision support for a dilbit spill to the shorelines of northern British Columbia (BC). In response to this objective, the contractor Coastal and Ocean Resources Inc. has conducted a meso-scale Diluted Bitumen Sediment Interactions Experiments (Bit_EX) to evaluate the potential of penetration and retention of dilbit in different types of sediments. In total, two dilbits, Access Western Blend (AWB) and Cold Lake Blend (CLB) at three weathered states (0%, 17% and 26% mass loss), were tested against seven types of sediments (from coarse sand to very large pebble). The adhesion of dilbit on bare cobbles and on cobbles covered with barnacles and seaweed (fucus) was also tested for different time of exposure. Results showed that unweathered (or fresh) dilbit has its maximum penetration and retention in coarse sand or granule whereas moderately weathered dilbit has maximum penetration and retention in small pebbles or larger sediment sizes. Heavily weathered dilbits have very limited penetration in finer sediments but are expected to penetrate and have high retention in permeable coarse sediments. Moreover, we have observed that dilbit adherence could be enhanced with longer drying time. In northern BC, the bedrock platforms with thin overlays of various types of sediment, from sand to boulders, are common and presents a complex case for treatment. Because dilbit characteristics change rapidly, early SCAT survey data combined with rapid decision and operational response in the initial stages of the spill could reduce dilbit retention and adhesion. The Bit_EX also suggests that existing techniques for protection and cleanup of conventional oil on shorelines could be applicable or can be adjusted for dilbit spills. This experiment provides information suitable to a first response guide for protecting and cleaning shorelines in case of bitumen spills in northern BC. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|