Ex Situ Spark Plasma Sintering of Short Powder-in-Tube MgB2 Tapes with Open and Closed Ends
Autor: | Petre Badica, Adrian M. Ionescu, Andrei Kuncser, Gheorghe Aldica, Stelian Popa, Iuliana Pasuk, M. Burdusel |
---|---|
Rok vydání: | 2018 |
Předmět: |
Pressing
Materials science Analytical chemistry Spark plasma sintering 02 engineering and technology 021001 nanoscience & nanotechnology Condensed Matter Physics 01 natural sciences Electronic Optical and Magnetic Materials Core (optical fiber) Impurity Phase (matter) 0103 physical sciences Tube (fluid conveyance) Crystallite 010306 general physics 0210 nano-technology Pinning force |
Zdroj: | Journal of Superconductivity and Novel Magnetism. 31:3423-3432 |
ISSN: | 1557-1947 1557-1939 |
DOI: | 10.1007/s10948-018-4616-9 |
Popis: | Short powder-in-tube tapes of MgB2 in the Fe sheath were fabricated by ex situ route from a commercial powder containing some free Mg and MgO impurity phases. The final heat treatment was performed by spark plasma sintering (SPS). Tapes were with open (OT) or closed (CT) endings. Closed endings were made by folding and pressing. The MgB2 core of the OT sample has shown a higher low-field critical current density, a higher maximum pinning force, a slightly higher disorder, smaller average MgB2 crystallite size, a weak contact between Fe and MgB2 core, and more macro-flux jumps. The upper and irreversibility fields were similar for OT and CT samples. In the center of the MgB2 cores, the detected impurity phase is MgO, while at the interface with Fe, MgB4 also occurs. Impurity phases found at interface, MgO and MgB4, are present in the center of the bulk SPSed samples. Reactions and pinning-force-related parameters are discussed with respect to Mg behavior influenced by condition of endings. It is inferred that the presence of free Mg in the raw MgB2 powder has an important contribution to observed differences, and its removal or control is recommended. |
Databáze: | OpenAIRE |
Externí odkaz: |