A method to estimate normal mode noise voltage induced on indoor telecommunication lines due to adjacent AC supply lines
| Autor: | Fumio Ootsuki, Mitsuo Hattori, Tsuyoshi Ideguchi |
|---|---|
| Rok vydání: | 1994 |
| Předmět: |
Engineering
Admittance Computer Networks and Communications business.industry Electrical engineering Noise (electronics) Line (electrical engineering) Disturbance voltage Coupling (electronics) Common-mode signal Electrical and Electronic Engineering business Telecommunications Electrical impedance Voltage |
| Zdroj: | Electronics and Communications in Japan (Part I: Communications). 77:108-116 |
| ISSN: | 1520-6424 8756-6621 |
| DOI: | 10.1002/ecja.4410770910 |
| Popis: | When metallic telecommunication lines carrying digital signals are laid adjacent to ac supply lines in an office or a house, then the noise generated by the ac supply lines is induced on the telecommunication lines and the quality of transmission may be degraded. To calculate the induced voltage generated directly between the cores of a telecommunication line requires accurate values of the coupling admittance or coupling impedance between the two lines corresponding to the cable construction and the problem becomes very complicated. This paper proposes a simple method of estimating the voltage induced between the cores of a telecommunication line when the telecommunication line is laid adjacent to an ac supply line. The amount of coupling from the primary circuit with an open-circuited terminal and with a short-circuited terminal to the secondary circuit is measured. Using this value, the characteristics of the induced voltage corresponding to an arbitrary value of terminal impedance of the primary or secondary circuit simply are estimated. The validity of the estimation method was confirmed by experiments. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|