Autor: |
Sławomir Kołodziej, Wiktoria Ratuszek, J. Kowalska, W. Ozgowicz, K. Chruściel |
Rok vydání: |
2013 |
Předmět: |
|
Zdroj: |
Solid State Phenomena. :71-76 |
ISSN: |
1662-9779 |
DOI: |
10.4028/www.scientific.net/ssp.203-204.71 |
Popis: |
The aim of this work was the microstructure and texture analysis of a deformed via cold-rolling 24.5Mn-3.5Si-1.5Al-Ti-Nb TWIP/TRIP type steel. It was found, that during cold plastic deformation a phase transformation of austenite into martensite takes place. The transformation progress was confirmed by the microscopic investigations. The texture of austenite is characterized by a limited α1=||RD fibre and the γ=||ND fibre. The texture of austenite changed with increasing deformation rate. In the texture of deformed austenite the strongest orientation is the {110} Goss orientation, which belongs to the α=||ND orientation fibre. During cold plastic deformation γ→ε and γ→ε→α’ phase transformations as well as the deformation of γ, ε and α’ phases are taking place in the steel. The formed ε phase (hexagonal structure) also possesses a distinct texture. |
Databáze: |
OpenAIRE |
Externí odkaz: |
|