Magnetic and Photovoltaic Properties of Calcium-Doped ${\hbox{BiFeO}}_{3}$ Ceramic
| Autor: | C.-M. Hung, Zhe-Rui Xu, Pin-Yi Chen, Yi Ting, Chi-Shun Tu |
|---|---|
| Rok vydání: | 2014 |
| Předmět: | |
| Zdroj: | IEEE Transactions on Magnetics. 50:1-4 |
| ISSN: | 1941-0069 0018-9464 |
| DOI: | 10.1109/tmag.2013.2278464 |
| Popis: | The magnetization hysteresis loop, structure, and grain morphology of (Bi0.85Ca0.15)FeO2.925 (15%Ca-BFO) ceramic, prepared by the solid state reaction, have been studied at room temperature and were compared with BiFeO3 (BFO) ceramic. The 15%Ca-BFO ceramic exhibits a pseudo-cubic structure and a linear antiferromagnetic magnetization loop with magnetic susceptibility of 4.5×10-6 emu/gOe, which is slightly less than 6.7×10-6 emu/gOe observed in BFO due to the heterovalent substitution from Bi3+ to Ca2+. The 15%Ca-BFO with electrodes of indium tin oxide (ITO) and Au films shows significant photovoltaic effects under near-ultraviolet light of λ = 405 nm. The open-circuit voltage (Voc) and short-circuit current density (Jsc) under illumination can be described by the exponential equations Voc = Vb[1-exp(-I/α)] and Jsc = Jb[1-exp(-I/β)] as a function of light intensity (I). Vb and Jb are the balance open-circuit voltage and short-circuit current density, respectively. α and β are characteristic constants. The maximal power-conversion efficiency (η) can reach η ~ 0.0034%, which is larger than η ~ 0.0025% found in graphene/ polycrystalline BFO/ Pt films. The characteristic curve of current versus bias voltage at dark suggests a p-n junction-like depletion region in the interface between ITO film and 15%Ca-BFO ceramic. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|