Combustion Synthesis and Sintering of β-Sialon Ceramics (z = 2)
| Autor: | Toshitaka Sakurai, Mohamed Radwan, Soshu Kirihara, Yoshinari Miyamoto, Mohamed Shahien |
|---|---|
| Rok vydání: | 2008 |
| Předmět: | |
| Zdroj: | Journal of the Society of Materials Science, Japan. 57:1248-1252 |
| ISSN: | 1880-7488 0514-5163 |
| Popis: | Single-phase (β-SiAlON (Si4Al2O2N6, z = 2) powder has been prepared by the combustion synthesis method. The raw materials (Si, Al and SiO2) were combusted with different ratios of (β-SiAlON (z = 1) diluent (0, 10, 20, 30, 40, 50wt%) in 1MPa of N2 pressure. Without diluent, the reaction temperature was very high (> 2000°C) and the product contained metal Si residue besides (β-SiAlON product. Both the reaction temperature and amount of residual Si decreased gradually with the increase of diluent content up to 50wt%. At 50wt% dilution, the combustion temperature was 1859°C and the XRD analysis showed complete conversion to pure (β-SiAlON (z = 2). The individual peaks of (β-SiAlON (z = 1) diluent were also detected in the XRD patterns and disappeared after using the product itself as a diluent five time repeats of combustion at which single-phase (β-SiAlON (z = 2) was produced. The sinterability of the best synthesized powder was further studied by spark plasma sintering (SPS) with 5wt% Y2O3 as a sintering aid. High densification (∼97.3%) was obtained after sintering at 1600°C for 5 min under 30MPa pressure with heating and cooling rates of 100°C/min. The Vickers hardness and fracture toughness of the sintered SiAlON were 14.8GPa and 4.4MPam1/2, respectively. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|