Investigation of the method of thermal friction turn-milling of high strength materials

Autor:	Muratbek Usserbayev, Yeldos Bekzhanov, Medgat Mussayev, Nazerke Abisheva, Nurgul Karsakova, Issa Kuanov, Balgali Myrzakhmet, Sabit Magavin, Karibek Sherov
Rok vydání:	2022
Předmět:	Materials science Renewable Energy Sustainability and the Environment Mechanical Engineering Thermal Turn (geometry) General Engineering Transportation Composite material Safety Risk Reliability and Quality Civil and Structural Engineering
Zdroj:	Journal of Applied Engineering Science. 20:13-18
ISSN:	1821-3197 1451-4117
DOI:	10.5937/jaes0-29546
Popis:	An analysis of the state of the matter of the manufacture of parts such as bodies of revolution has shown that there is a problem of turning processing by turning large, long parts, connected with increasing productivity and processing quality, as well as reducing the costs of turning operations. To solve this problem, the authors propose a resource-saving combined method for treating external cylindrical surfaces by thermal friction turn-milling. Experimental studies were performed on the processing of the outer cylindrical surface using a special friction cutter made of non-instrumental material. The results showed that with thermal friction turn-milling, it is possible to achieve Ra = 1,0 mcm. The process of chip formation was also investigated and the formation of a retarded layer was established, which protects the surface of the friction cutter from wear. Optimum values of cutting conditions for processing by thermal friction turn-milling of steel 30HGSA.
Databáze:	OpenAIRE
Externí odkaz:	https://explore.openaire.eu/search/publication?articleId=doi_________::14832104cb801e52fddb872823f131cd https://doi.org/10.5937/jaes0-29546 Zobrazit plný text záznamu