Dry aerosol jet printing of conductive silver lines on a heated silicon substrate
| Autor: | N V Protas, A. A. Efimov, Pavel V. Arsenov, Victor V. Ivanov, M. N. Urazov, K N Minkov |
|---|---|
| Rok vydání: | 2018 |
| Předmět: |
Fabrication
Materials science Silicon technology industry and agriculture chemistry.chemical_element Nanoparticle Sintering 02 engineering and technology Substrate (printing) equipment and supplies 021001 nanoscience & nanotechnology 01 natural sciences Silver nanoparticle 010309 optics chemistry Electrical resistivity and conductivity 0103 physical sciences Composite material 0210 nano-technology Electrical conductor |
| Zdroj: | IOP Conference Series: Materials Science and Engineering. 307:012082 |
| ISSN: | 1757-899X 1757-8981 |
| DOI: | 10.1088/1757-899x/307/1/012082 |
| Popis: | A new method for dry aerosol jet printing conductive lines on a heated substrate is presented. The method is based on the use of a spark discharge generator as a source of dry nanoparticles and a heating plate for their sintering. This method allows creating conductive silver lines on a heated silicon substrate up to 300 °C without an additional sintering step. It was found that for effective sintering lines of silver nanoparticles the temperature of the heated substrate should be about more than 200-250 °C. Average thickness of the sintered silver lines was equal to ~20 µm. Printed lines showed electrical resistivity equal to 35 μΩcm, which is 23 times greater than the resistivity of bulk silver. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|