Wear behavior of WCP/Fe–C composites under high-speed dry sliding

Autor:	Mao Xie-min, Yu Hua, Song Yan-pei
Rok vydání:	2008
Předmět:	Materials science business.product_category Mechanical Engineering Tribology Wear resistance Mechanics of Materials Centrifugal casting (industrial) Solid mechanics Low load Die (manufacturing) General Materials Science Composite material business Sliding wear
Zdroj:	Journal of Materials Science. 43:2686-2692
ISSN:	1573-4803 0022-2461
Popis:	WCP/Fe–C composites are manufactured by centrifugal casting method. Dry sliding wear behaviors of the composites containing about 70 vol.% of WCP were investigated at room temperature against 3Cr2W8V die steel counter face. And wear experiments were performed under loads of 50, 100, 150, and 200 N and sliding velocities of 20, 40, 60, and 80 m/s. Results showed that at the low load of 50 N, the composites, under different sliding velocities, all displayed significantly superior wear resistance. Meanwhile the results also showed that the variation of wear weight loss and wear rate of the composites was almost linear with sliding velocity when the sliding velocity and the load were below 60 m/s and 100 N. But as the sliding velocity and the load exceed 60 m/s and 100 N, the weight loss and wear rate of the composites increased rapidly. But the effect of the load applied on wear weight loss and wear rate was larger than that of the sliding velocity. Finally, the mechanism of the dry sliding wear is discussed in the article.
Databáze:	OpenAIRE
Externí odkaz:	https://explore.openaire.eu/search/publication?articleId=doi_________::13f1f5936cbad6e3bd2a2576e7baef43 https://doi.org/10.1007/s10853-007-2415-y Zobrazit plný text záznamu