Bilayer heterojunction polymer solar cells using unsubstituted polythiophene via oxidative chemical vapor deposition
Autor: | David C. Borrelli, Vladimir Bulovic, Miles C. Barr, Karen K. Gleason |
---|---|
Rok vydání: | 2012 |
Předmět: |
Materials science
Organic solar cell Renewable Energy Sustainability and the Environment Bilayer Heterojunction Chemical vapor deposition Photochemistry Polymer solar cell Surfaces Coatings and Films Electronic Optical and Magnetic Materials chemistry.chemical_compound chemistry Absorption edge Vacuum deposition Polythiophene |
Zdroj: | Solar Energy Materials and Solar Cells. 99:190-196 |
ISSN: | 0927-0248 |
Popis: | We demonstrate the use of a vacuum-based, vapor phase technique for the deposition of a donor polymer for use in polymer solar cells. Unsubstituted polythiophene (PT), which is insoluble and infusible and thus typically difficult to process, is easily prepared by oxidative chemical vapor deposition (oCVD). The oCVD process results in a conductive PT film that is heavily doped with FeCl 3 , which is used as the oxidizing agent. A post-deposition methanol rinse sufficiently dedopes the film and removes spent oxidant, leaving semiconducting PT with an optical bandgap close to 2 eV. Drastic changes in the film color, absorption spectra, and film composition confirm the dedoping process. The resulting semiconducting PT is then applied as an electron donor in bilayer heterojunction solar cells with a thermally evaporated C 60 electron acceptor layer, resulting in power conversion efficiencies up to 0.8%. The absorption edge of the PT at ∼620 nm closely matches the edge present in the external quantum efficiency spectra, indicating that the oCVD PT contributes to the photocurrent of the devices. This demonstrates that the oCVD technique can be used in the processing and design of polymer active layers for polymer solar cells and hybrid small molecular organic solar cells without solubility, temperature, or substrate considerations. |
Databáze: | OpenAIRE |
Externí odkaz: |