| Autor: |
Fu Cheng Cao, Qin Yin Fan, Hong Wu Qin, Maimai Jiang Aishan |
| Rok vydání: |
2014 |
| Předmět: |
|
| Zdroj: |
Advanced Materials Research. :1893-1897 |
| ISSN: |
1662-8985 |
| DOI: |
10.4028/www.scientific.net/amr.1070-1072.1893 |
| Popis: |
Acoustic emission (AE) method of nondestructive check is based on exertion wave radiation and their registration during fast local material structure reorganization. It is used as a means of analysis of materials, constructions, productions control and diagnosis during operating time. In the article, it is applied to structural health monitoring of Wind Turbine Gearbox (WTG). Acoustic emission testing has been used for years to test metallic structures. More recently it has become the primary method of testing WTG; all are present in the failure of WTG. AE has been very successful at detecting all of these failure mechanisms and sometimes identifying them from amplitude analysis of the AE signals. However in large structures, the high acoustic attenuation in WTG precludes amplitude analysis unless the origin of the individual signals can be identified and corrections for the distances traveled applied to the signal amplitudes. The usual method of testing WTG structures has been to apply an array of sensors spaced so that a moderate amplitude AE signal occurring midway between them will just barely trigger each sensor. |
| Databáze: |
OpenAIRE |
| Externí odkaz: |
|
