Magnetically-mediated regeneration and reuse of core-shell Fe0@FeIII granules for in-situ hydrogen sulfide control in the river sediments
| Autor: | Mengli Guo, Yu Li, Feng Jiang, Jianxin Yao, Jianliang Sun, Yueping Liu, Weijun Sun, Jierui Yang, Qiaoyun Wen |
|---|---|
| Rok vydání: | 2019 |
| Předmět: |
Environmental Engineering
Sulfide Hydrogen sulfide 0208 environmental biotechnology Iron oxide Maghemite Iron sulfide 02 engineering and technology 010501 environmental sciences engineering.material 01 natural sciences Ferrous chemistry.chemical_compound Waste Management and Disposal 0105 earth and related environmental sciences Water Science and Technology Civil and Structural Engineering chemistry.chemical_classification biology Ecological Modeling Granule (cell biology) biology.organism_classification Pollution 020801 environmental engineering Chemical engineering chemistry engineering Geobacter |
| Zdroj: | Water Research. 157:621-629 |
| ISSN: | 0043-1354 |
| DOI: | 10.1016/j.watres.2019.03.066 |
| Popis: | A novel iron-cycling process based on core-shell iron granules, which contained zero-valent iron (Fe0) in the core and maghemite (γ-Fe2O3) on the shell (Fe0@FeIII granules), was proposed to in-situ control hydrogen sulfide in the sediments of the polluted urban rivers. The Fe0@FeIII granules added in the top sediment layer removed 97% of sulfide generated by sulfate-reducing bacteria in the sediments, and the sulfide removal capacity of virgin granules was 163 mg S/g Fe (114 mg S/g granule). The Fe0@FeIII granules removed the formed sulfide through the abiotic sulfide oxidation and precipitation, and they also stimulated the microbial iron reduction, which competitively consumed wastewater-derived organics and partially inhibited the sulfate reduction in the sediments. The used Fe0@FeIII granules were easily regenerated through magnetic separation from sediments and air exposure for 12 h, which enhanced the sulfide removal capacities of the regenerated granules by 12%–22%, compared to the virgin granules. During the air exposure, ferrous products (i.e., iron sulfide and surface-associated FeII) on the granule shell were completely oxidized to poorly ordered FeIII hydroxides (γ-FeOOH and amorphous FeOOH) having larger specific surface areas and higher reactivity to sulfide than γ-Fe2O3 on the virgin granules. Meanwhile, the Fe0 in the core was also partially oxidized through the indirect electron transfer, which was facilitated by the electrically conductive iron oxide minerals (Fe3O4 and Fe2O3) and the microbial electron carriers (e.g., Geobacter). The oxidation of Fe0 core contributed additional FeIII hydroxides to the sulfide control. The Fe0@FeIII granules were reused for four times in a 293-day trial, and their overall sulfide removal capacity was at least 920 mg S/g Fe. The proposed iron-cycling process can be a chemical-saving, energy-saving and cost-effective approach for the hydrogen sulfide control in the sediments of polluted urban rivers, as well as lakes, aquaculture ponds and marine. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|
Full Text from ScienceDirect