Time-resolved chemical composition of small-scale batch combustion emissions from various wood species
Autor: | Julija Grigonyte-Lopez Rodriguez, Sanna Antikainen, Hanna Koponen, Jani Leskinen, Ralf Zimmermann, Heikki Lamberg, Jarkko Tissari, Jorma Jokiniemi, Olli Sippula, Miika Kortelainen, Ilpo Nuutinen, Petri Tiitta |
---|---|
Rok vydání: | 2018 |
Předmět: |
010504 meteorology & atmospheric sciences
General Chemical Engineering Organic Chemistry Energy Engineering and Power Technology Carbon black 010501 environmental sciences Particulates Combustion medicine.disease_cause 01 natural sciences Soot Aerosol Fuel Technology Environmental chemistry medicine Environmental science Char Combustion chamber Chemical composition 0105 earth and related environmental sciences |
Zdroj: | Fuel. 233:224-236 |
ISSN: | 0016-2361 |
Popis: | Small-scale batch combustion of wood is a major source of fine particles, black carbon emission and polycyclic aromatic hydrocarbons in Finland. The mass and chemical compositions of batch combustion emissions are known to be highly time-dependent. In this study, the gaseous and particulate batch combustion emissions of three European wood species (beech, birch and spruce) were quantified in detail with an extensive set of online analysers, including a soot particle aerosol mass spectrometer (SP-AMS) for real-time detection of particulate chemical composition. Ignition and a new batch addition on top of glowing embers were identified as the primary low temperature events during which both particulate and gaseous organic emissions peaked. The flaming combustion created high temperature conditions and produced increased emissions of refractory black carbon (rBC) and PAHs. The residual char combustion phase was characterized by low particulate mass emission consisting mainly of alkali salts and elevated concentrations of gaseous organic emissions and CO. Overall, hardwood species (beech and birch) had the highest PM1 emissions, and the difference between the lowest average emission (spruce) and the highest (birch) was more than 3-fold. The increasing combustion chamber temperature during sequential combustion of wood batches was found to decrease the carbonaceous fraction of the PM as well as OC/EC ratio, as the result of more efficient secondary combustion. |
Databáze: | OpenAIRE |
Externí odkaz: |