Study on casting process of array holes
| Autor: | Qu Yingdong, G. Qing, Li Guanglong, Jun-hua You, Li Rongde, Ruirun Chen, Jin Meiling |
|---|---|
| Rok vydání: | 2016 |
| Předmět: |
0209 industrial biotechnology
Engineering drawing Melt viscosity Materials science Mechanical Engineering Molten metal chemistry.chemical_element 02 engineering and technology engineering.material 021001 nanoscience & nanotechnology Casting Industrial and Manufacturing Engineering Computer Science Applications Surface tension Core (optical fiber) 020901 industrial engineering & automation Coating chemistry Control and Systems Engineering Aluminium engineering Graphite Composite material 0210 nano-technology Software |
| Zdroj: | The International Journal of Advanced Manufacturing Technology. 86:3173-3177 |
| ISSN: | 1433-3015 0268-3768 |
| DOI: | 10.1007/s00170-016-8457-z |
| Popis: | Aluminum array holes were prepared by casting method which was carried out by using stainless steel wires coated with graphite coating as hole core. It has been verified by analyzing that because of the molten metal filling, ability was mainly affected by metallostatic pressure, surface tension, and melt viscosity. In this experiment, the array hole with a regular arrangement, round shape, and uniform diameter can be acquired under the condition that center spacing of adjacent hole core be greater than the diameter of the hole core. And the average diameter of array holes was about 0.55 mm and center spacing of adjacent hole was about 2.95 mm, there were almost no defects on the specimen. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|