Material Characteristic for Capability Analysis of Solid Tire by Finite Element Method
| Autor: | Chakrit Suvanjumrat, Juthanee Phromjan |
|---|---|
| Rok vydání: | 2018 |
| Předmět: |
010302 applied physics
Materials science business.industry Mechanical Engineering 02 engineering and technology Structural engineering 021001 nanoscience & nanotechnology 01 natural sciences Finite element method Mechanics of Materials 0103 physical sciences General Materials Science 0210 nano-technology business |
| Zdroj: | Key Engineering Materials. 777:416-420 |
| ISSN: | 1662-9795 |
| DOI: | 10.4028/www.scientific.net/kem.777.416 |
| Popis: | The natural rubber compound of each layer of solid tire had determined the mechanical properties in tension. It was found that the stress-strain relation of each material tire layer was fitted very well with the Ogden constitutive model. The R2 which was 0.986, 0.996 and 0.985 represented the certain curve fitting on the internal, middle and tread layer of solid tire, respectively. Subsequently, the Ogden model was implemented in the finite element model of the rubber specimen and solid tire. The finite element analysis results obtained an average error of 18.00% and 14.63% for the specimen and solid tire model by comparing to the physical experiment, respectively. Particularly, the mechanical properties of the natural compounds could be used to predict the ultimate compression load for the solid tire failure. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|